GNI ApS      -      Hoesterkoebvej 52       -      DK-2970 Hoersholm       -      Denmark       -      Telephone: +45 45823754       -      Copyright by GNI ApS


Installed scanner dimensions:            270 cm x 135 cm x 155 cm (8.9 x 4.4 x 5.0 feet) (l x w x h)

Installed weight:                               1.400 kg (3.100 lbs)

Recommended floor space:               13 square meter (5,0 x 2,6 m) or 140 square feet (16.4 x 8.5 feet)

Effective scanning diameter:              400 mm (16 inch.)

Gantry opening:                               500 mm (20 inch.)

Effective scanning length:                 1.100 mm (44 inch.)

Patient Table lenght:                        1.700 mm (67 inch.)

Power:                                            110/220 Vac, 3 phases with ground

Power consumption :                        Average 1 kW

X-ray Tube Power:                            2 kW

X-ray Tube Voltage:                          40-120 kV

Scanning time:                                1 CT-scanning of 180 mm (7 inch.) takes 35 sec.

CT Voxel (high resolution):                Down to 0,20 mm x 0,20 mm x 0,20 mm
Width of the X-ray cabinet when disassembled is only 65 cm - it passes easily through a standard office door
The X-ray cabinet is shielded with 5 mm lead - no shielding of the CT-scanner room is required
The CT-scanner is plugged into a standard 110-220 Vac power outlet - no power installation is required
Recommended floor plan in mm